Aktuelle Forschungsprojekte

Image Thermal engines
Image Low Temperature Measuring Service
Image Humidifier System for High-Purity Gases
Image Air-flow test rig for fan characteristic measurement
Image Certification of efficient air conditioning and ventilation systems through the new "indoor air quality seal" for non-residential buildings
Image Practical training, diploma, master, bachelor
Image State of system and failure analyses
Image Combined building and system simulation
Image Optimizing HVAC operation with machine learning
Image Ice Slurry Generation
Image Pulse-Tube-Refrigerator with sealed compressor
Image High temperature heat pump
Image Industry 4.0 membrane heat and mass exchanger (i-MWÜ4.0)
Image Characterisation of Superconductors in Hydrogen Atmosphere
Image Thermostatic Expansion Valves
Image Tribological investigations of oil-refrigerant-material-systems

You are here:   /  Home


Reduction of primary noise sources of fans

Dr.-Ing. Ralph Krause

+49-351-4081-5318

...using numerical and experimental methods with contra-rotating axial fan

Focus of the research project

The project aims at the development of a low-noise contra-roating axial fan stage by conserving the high power density with respect to the acoustically demanding operating conditions. The noise reduction is achieved by a special design of the blades as well as braces with contact to the air flow. The potential of noise reduction is obtained by reducing

  • the specific sound power level and the improvement of
  • the psycho-acoustic parameters.

Reasons for noise sources

Sound sources can be characterised by the following figure according to Bommes (1994) and Carolus (2013).

Oppertunities of the blade design at axial fans.

Summary of noise source on fans (green: important noise sources at axial fans)

Pressure fluctuations due to transient forces at the blades are the main reasons for noise propagation. All further reasons (secondary sources, tertiary sources and stationary blade forces) are of minor importance or can not be influenced by fluiddynamical changes.

Noise Reduction

Due to the noise sources, different activities can be taken into account for reducing the noise propagation at fans. According to figure 2, following noise sources shall be in the focus of the research:

  • leading edge noise
  • trailing edge noise
  • instability waves
  • periodical separations
  • large scale separations
  • turbulent boundary layer
  • tip vortices

Outcome

The research project aims at the application of noise reducing activities of technical and psycho-acoustical manner with a contra-rotating fan by maintaining a constant high-level power density. The whole potential of noise reduction is estimated to be

  • 10 dB .
parameterstateaim (reduction)
specific sound power level43 dB-5...-7 dB
Psychoakustik no values -3...-5 dB (estimated)

Solution

The potential of noise reduction is divided into:

  • the reduction of the specific sound power level and
  • the improvement of the psycha-caoustics.

Throughout the research project, the following applications will be investigated:

  • serrations at the trailing edge a the first whell
  • sinusoidal structures at the leading edge of the second whell
  • porous structures at the first whell
  • serrations at the trailing edge of the first braces
  • sinusoidal structures at the leading edge of the second braces
  • porous elements in the shroud for reducing tip vortex noise 

Following techniques will be employed to obtain a solution:

Co-operation partners

You are interested? Get in contact with us.

Publications

Kercher M, Heimann J, Puhl C, Oeckel K, Friebe C and Krause R (2018), "Application of Rotational Beamforming Algorithms on fast Rotating Sound Sources", 7th Berlin Beamforming Conference 2018.

Kerscher M, Heilmann G, C.Puhle, Krause R and Friebe C (2017), "Sound Source Localization on a Fast Rotating Using Beamforming,the 46th International Congress and Exposition on Noise Control Engineering, Hong Kong, China", INTER-NOISE , HONG KONG. , pp. 626 (1-8).

Krause R, Friebe C, Kerscher M and Puhle C (2018), "INVESTIGATIONS ON NOISE SOURCES ON A CONTRA-ROTATING AXIAL FAN WITH DIFFERENT MODIFICATIONS", FAN 2018; International Conference on Fan Noise, Aerodynamcis, Applications and Systems, 18. – 20. 04. 2018, Darmstadt, Germany. , pp. 1-12.


Your Request

Further Projects

Image

Measurements on ceiling mounted cooling systems

Comparative performance measurement

Image

Micro fluidic expansion valve

for increasing of the efficiency of small and compact cooling units

Image

Solar Cooling

Solar Cooling with Photovoltaic

Image

Hydrogen and methane testing field at the ILK

Simultaneously pressures up to 1,000 bar, temperatures down to –253°C

Image

Low noise and non metallic liquid-helium cryostat

Low-noise Magnetic Field Cryostat for SQUID-Applications