You are here: Home / Measurements and Tests
Refining of fuel cell waste heat
The aim of the research project is the analysis of the possible applications of a fuel cell with recuperation in a rail vehicle. The focus is recognition of recuperation potentials from the waste heat flows within the rail vehicle and there especially the fuel cell drive. The waste heat that cannot be used directly is to be converted into electrical energy. By partially substituting the driving energy for air conditioning systems (fans, refrigerant compressors), the range of the vehicles should be increased.
Recuperation via ORC/Kalina process
Identified problematic fields:
low energy efficiency of the ORC process at given temperature levels
economic use of this technology means:
- Cost ratio must be in relation to the range extension Basis of comparison H2 consumption of a fuel cell train without recuperation
- low additional weight - energy yield must be significantly higher than the energy requirement resulting from the additional weight of the ORC recuperator
- no additional environmental pollution due to working material
- No increased risk potential due to technology used
Project Background / Motivation
The current climate protecction targets and the resulting obligations to improve environmental compatibility and sustainability requirements must result in rethinking processes in all areas of life and work.
Global networking and the resulting mobility of humans as well as the transport of material goods are causing enormous environmental pollution, which is about to change through the choice of more suitable energy sources.
The expected ban on the combustion of fossil fuels is forcing development concepts based on electric drives. One main problem is the storage of the energy source. There are concepts for using electrical energy storage devices (batteries, accumulators). Another way is to distribute electrical energy via overhead or underground lines. However, this requires an existing infrastructure, which cannot be built economically in all areas.
The detour via liquids with high energy densities, such as fuels (petrol, diesel, methanol) is currently the most used common route.
Renewable energy sources such as hydrogen increasingly offer more and more an alternative despite high safety requirements.
Under these boundary conditions, a rail vehicle is to be developed which is to be used in regions that are oriented towards Northern or Central Europe with regard to geographical and climatic conditions. It is to be used on lines that cannot be electrified in an economically viable way.
The use of an ORC / Kalina process to convert waste heat into useful electrical energy in the rail vehicle represents a particular challenge, as only low efficiencies can be achieved at the usable temperature level.
The aim of the project is to prove the usability of this technology. Thereby, economical aspects of application shall be considered.
The increase of the range of a fuel cell powered rail vehicle, which is achieved by recuperation of the waste heat from the fuel cell, is to be demonstrated.
The technical use of an ORC / Kalina process to recuperate waste heat is in the rail vehicle represents a particular challenge, as only low efficiencies can be achieved at the usable temperature level.
The aim of the project is to prove the usability of this technology. Thereby, economical aspects of application shall be considered. The increase of the range of a fuel cell powered rail vehicle, which is achieved by recuperation of the waste heat from the fuel cell, is to be demonstrated.
Further Projects - Measurements and Tests
Development of test methods and test rigs for stationary integrated refrigeration units
How efficient is my refrigeration unit?