Aktuelle Forschungsprojekte

Image Ice Slurry Generation
Image Service offer for Leak Detection and Tightness Test
Image Refrigerants, lubricants and mixtures
Image Innovative cryogenic cooling system for the recondensation / liquefaction of technical gases up to 77 K
Image Measurement of insulated packaging
Image Cryostats, Non-Metallic and Metallic
Image Practical training, diploma, master, bachelor
Image Low Temperature Tribology
Image Cold meter
Image Innovative small helium liquefier
Image Calibration leak for the water bath leak test
Image Testzentrum PLWP at ILK Dresden
Image Optimizing HVAC operation with machine learning
Image Intelligent innovative power supply for superconducting coils
Image Verification of storage suitability of cryo tubes
Image Lifetime prediction of hermetic compressor systems

You are here:  Home /  Research and Development


High temperature heat pump

R. Noack

+49-351-4081-5219

Using waste heat from industrial processes

Industrial processes often generate waste heat, which can no longer be used in a technically sensible way due to its temperature level. Here, heat pump technology offers the possibility to increase the temperature level of the waste heat efficiently and without the use of fossil fuels and to make this heat energy usable again for processes.

Heat pumps for the heating of residential buildings are becoming increasingly widespread and will perspectively replace the oil and gas-operated heaters in most residential buildings.

For industrial applications with temperatures above 70°C the use of heat pumps in the market is still manageable or almost non-existent.

Within a research project the ILK has developed a demonstration object of a high temperature heat pump in the power range of 15 kW. Useful temperatures of 140°C were reached. The ILK is looking for partners who have application possibilities for the use of this technology.

From several funded research projects the ILK Dresden has collected manifold and extensive knowledge on this topic.

  • "Environmentally friendly CO2 heat pump for heating drinking water for industry" (FKZ MF090012)
  • "High temperature heat pump for applications above 120°C" (FKZ MF130081)
  • "High temperature heat pump module for commercial dryers" (FKZ ZF4079112RE7)
  • "Compact High-temperature Heat Pump with natural refrigerant" (FKZ KK5007302ZG0)

From these and other projects, the ILK Dresden has extensive experience with high temperature heat pumps with the following characteristics:

  • Refrigerants: partially fluorinated A1 safety refrigerants, natural refrigerants such as CO2 (R744), to a limited extent also combustible refrigerants such as propane (R290)
  • Heat source: air, water or thermal oil with temperatures 30°C - 100°C
  • Heat sink: air, water, steam or thermal oil with temperatures 80°C - 120°C+.
  • Power: 1 kW - 500 kW

Based on this knowledge we can develop and build high temperature heat pumps for you or support you in the development of such a heat pump.


Your Request