Current research projects

Investigation according to DIN EN ISO 14903

Helium extraction from natural gas

Certification of efficient air conditioning and ventilation systems through the new "indoor air quality seal" for non-residential buildings

Cryogenic liquid piston pumps for cold liquefied gases like LIN, LOX, LHe, LH2, LNG, LAr

Reduction of primary noise sources of fans

Air-flow test rig for fan characteristic measurement

IO-Scan - Integral measuring optical scanning method

State of system and failure analyses

ZeroHeatPump

Thermal engines

Calibration of Low Temperature Sensors

Optimizing HVAC operation with machine learning

In-situ investigation concerning the swelling behaviour of polymer materials under elevated pressures and temperatures

In-Situ-Swelling Behaviour of Polymer Materials in Flammable Fluids

Cold meter

Lifetime prediction of hermetic compressor systems

You are here: / Home

Testing of mobile leak detectors according to DIN EN 14624

auf Anfrage

Dipl.-Ing. (FH) René Seidel

+49-351-4081-5428

send mail

Performance test according to standard

Determination of the performance of mobile leak detectors

According to Regulation (EU) No. 517/2014, systems containing fluorinated greenhouse gases must be tested for leaks at regular intervals (varying between 6 months and 2 years) depending on the CO2 equivalent. In practice, mobile leak detectors are mainly used for this purpose.

To ensure the proper functioning of the equipment, Regulation (EC) 1516/2007 requires that refrigeration and air conditioning equipment and heat pumps with a charge > 3 kg of fluorinated greenhouse gases be tested for proper operation every 12 months. "The sensitivity of portable gas detection devices must be at least 5 g per year".

According to DIN EN 378-2 section 6.3.3.2, the detector must be calibrated at regular intervals according to the manufacturer's instructions.

The test procedure for at least annual inspections of the performance of mobile leak detectors and room monitors for halogenated refrigerants is described in DIN EN 14624.

For this check, use, for example, a testing device with a sliding or swiveling leak detector probe. The performance test includes:

static detection with detection limit
Response time
Cross sensitivity
dynamic detection limit
Detection limit with contaminated environment
Recovery time

For these tests, a test stand is available at the ILK Dresden on which mobile leak detectors can be tested for their performance.

To determine the performance, adjustable calibrated test leaks are filled with the appropriate test gases (e.g. R134a, R1234yf) and placed in the test stand. We would be pleased to perform this test for you. The test performed is certified with a test report.

Please direct inquiries about testing mobile leak detectors with the appropriate test gases to the contact above.

show full article