Aktuelle Forschungsprojekte

Image Ionocaloric cooling
Image Thermostatic Expansion Valves
Image Verification of storage suitability of cryo tubes
Image Optimizing HVAC operation with machine learning
Image Low temperature – test facilities
Image OVERALL SYSTEM OPTIMIZATION OF REFRIGERATION PLANT SYSTEMS FOR ENERGY TRANSITION AND CLIMATE PROTECTION
Image Ice Slurry Generation
Image Innovative Parahydrogen Generator Based on Magnets
Image Humidifier System for High-Purity Gases
Image Measurement of insulated packaging
Image Laseroptical measurement
Image Tribological investigations of oil-refrigerant-material-systems
Image Practical training, diploma, master, bachelor
Image Multifunctional electronic modules for cryogenic applications
Image Swirl-free on the move...
Image Industry 4.0 membrane heat and mass exchanger (i-MWÜ4.0)

You are here:   /  Home


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects