Current research projects

Image Air-flow test rig for fan characteristic measurement
Image Test method for high - temperature heat pump - oils
Image Cool Up
Image Range of services laboratory analyses
Image 3D - Air flow sensor
Image Calibration leak for the water bath leak test
Image Low noise and non metallic liquid-helium cryostat
Image Calibration of Low Temperature Sensors
Image Low temperature – test facilities
Image Investigation according to DIN EN ISO 14903
Image Reducing the filling quantity
Image Low Temperature Measuring Service
Image CO₂ GAS HYDRATES FOR SUSTAINABLE ENERGY AND COOLING SOLUTIONS
Image State of system and failure analyses
Image Non- invasive flow measurements
Image Test rigs for refrigeration and heat pump technology

You are here:   /  Home


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects