Current research projects

State of system and failure analyses

Solar Cooling

Measurements on ceiling mounted cooling systems

Calibration of Low Temperature Sensors

Tribological investigations of oil-refrigerant-material-systems

Investigation of coolants

Energy efficiency consulting - cogeneration systems

Electrochemical decontamination of electrically conducting surfaces „EDeKo II“

Test procedures for electrical components

Hydrogen and methane testing field at the ILK

Software for technical building equipment

Mass Spectrometer

In-Situ-Swelling Behaviour of Polymer Materials in Flammable Fluids

Calibration leak for the water bath leak test

Corrosion inhibitor for ammonia absorption systems

High Capacity Pulse Tube Cooler

You are here: Home / Research and Development

Optimizing HVAC operation with machine learning

BMWi Euronorm Innokom

01/2019–05/2021

Dr.-Ing. Thomas Oppelt

+49-351-4081-5321

send mail

in progress

Intelligent control of HVAC systems – high comfort with low energy demand

Motivation

During operation, the energy efficiency of many HVAC systems remains considerably below the value predicted when planning. One reason is that especially complex systems with multiple generators, storages and consumer locations frequently are not operated optimally.

Aim of the project

Development of a tool for optimizing the operation of HVAC systems which uses machine learning (ML) methods and data from the digital building model (Building Information Model, BIM):

Optimization goal: high energy efficiency with at the same time high comfort for users
Saving operating costs, energy and carbon dioxide emissions due to increased efficiency
Continuous autonomous improvement of the ML algorithm by learning from new measured data with auto-adaptive reaction to changing conditions (building, system, use, smart meter for real time billing of energy and media, etc.)

Approach

Reproduction of the real system’s thermal-energetic behaviour in the machine learning system, training with BIM data, measured data and a digital twin of the real system

Application of ML methods for load forecasting (weather, usage patterns)
Automatic classification of utilisation scenarios, fault detection
Integration of available tools for efficient simulation of indoor air flows and for calculating energy demands
Co-Validation of optimization tool, experimental studies and digital twin