Current research projects

Image Software modules
Image Cool Up
Image Ionocaloric cooling
Image Heat2Power
Image In-situ investigation concerning the swelling behaviour of polymer materials under elevated pressures and temperatures
Image Swirl-free on the move...
Image Pulse-Tube-Refrigerator with sealed compressor
Image Combined building and system simulation
Image Mass Spectrometer
Image Service offer for Leak Detection and Tightness Test
Image All-in-one device for freeze-drying and production of biomaterial
Image Optimizing HVAC operation with machine learning
Image Non- invasive flow measurements
Image In-Situ-Swelling Behaviour of Polymer Materials in Flammable Fluids
Image Micro heat exchangers in refrigeration
Image Innovative Manufacturing Technologies for Cryosorption Systems

You are here:   /  Home


Intelligent innovative power supply for superconducting coils

Dr. Andreas Kade

+49-351-4081-5117

Compact, powerful power supply with 4-quadrant converter

The aim of the R&D project is the development of an intelligent innovative power supply as a 4-quadrant controller and energy storage device, which consists of a communicating system between quench protection and current flow control at the superconductor. The development shall be characterized by safety, compactness, accuracy, user friendliness, good price-performance ratio and modularity. The combination of cryogenic and warm electronics will provide significant advantages.
The functional model developed and constructed for this purpose has the following parameters and properties:

  • 4-quadrant power supply with ± 25 V and ± 14 kA
  • Constant voltage quench protection system
  • Cryogenic switch (cryogenic)
  • Energy storage system

The components for the energy storage system consists of individual cells with a capacity of 3000 F and a voltage of 2.7 V. 51 modules are connected in parallel, each with 10 individual cells, to form a capacitor bank. This results in a capacity of 15,300 F and a voltage of 25 V. A 3 kA, 30 V device serves as power supply, which has already been successfully tested on a cryogenic power supply.
In the next step, the configured capacitor modules for the energy storage and the boards of the 4-quadrant controller, see Figure 1, were combined in three switch cabinets, see Figure 2. The completed switch cabinet is shown in Figure 3. First results were presented at the 16th Cryogenics in October 2021.
 


Your Request

Further Projects

Image

Characterisation of Superconductors in Hydrogen Atmosphere

Are superconductors really compatible with hydrogen?

Image

Corrosion inhibitor for ammonia absorption systems

An alternative to chromium(VI) compounds

Image

Development of a Cryogenic Magnetic Air Separation Unit

Oxygen Enrichment by Applied Cryogenic Magnetohydrodynamics

Image

Software for test rigs

Individual software for complex tests and evaluation