Preformance measurements of heat exchangers

Hydrogen and methane testing field at the ILK

Non- invasive flow measurements

Test method for high - temperature heat pump - oils

State of system and failure analyses

Breakthrough Sensor for Adsorption Filters (BelA)

Air-water heat pumps

Electrical components in refrigeration circuits

In-situ investigation concerning the swelling behaviour of polymer materials under elevated pressures and temperatures

Innovative Parahydrogen Generator Based on Magnets

Calibration of Low Temperature Sensors

Reduction of primary noise sources of fans

Tensile and compression testing

High temperature heat pump

Development of a Cryogenic Magnetic Air Separation Unit

Cold meter

You are here: Home / Research and Development

IO-Scan - Integral measuring optical scanning method

INNO-KOM

02/2022 - 07/2024

M.Sc. Rebekka Grüttner

+49-351-4081-5314

IO-Scan

Cost-effective, real-time assessment of indoor air quality in the form of air exchange rates
Verify and optimise the effectiveness of ventilation systems in occupied areas
Ability to evaluate aerosol reduction through the interaction of window ventilation, building ventilation system and mobile room air cleaners

Self-calibrating measuring system
Deviation from previous trace gas measurements should be within 10%.
Real-time results can detect and evaluate the influence of changes in the ventilation system during the measurement process
Intended measurement depth in the room: 1 m to 50 m

The introduction of mist aerosols into the room air influences the light transmittance to be measured.
Transmittance of an air-aerosol mixture and use of measured transmittance to determine air exchange rate
Integral real-time optical measurement over individual indoor distances