You are here: Home / Technology transfer
3D - Air flow sensor
Dr. Ralph Krause
Anemometer for determination of 3d-air flow
Measuring System for determination of three-dimensional air flow conditions
The termal air flow sensor on flow-through-basis is an air velocity anemometer for determination oft he amount and the direction of a three-dimensional air flow in a gaseous fluid. The main application field is the determination of very low air velocities with changeable flow direction and high turbulence rates.
The new thermal flow sensor on flow-through-basis enables the determination of the air flow vector in a three-dimensional air flow field on a most simple way and with very high accuracy.
If there are turbulent air flows the effect of turbulence on the measuring result is considered. The actual flow vector is recorded in a large time resolution. Therefore the determination of an unsteady flow vector is possible too.
No special knowledge for the realization of the measuring tasks is required from the user. The measuring system is simple to handle and mechanically very robust.
The determination of flow vector is carried out online. By this way the demand for one measurement is limited on minimum.
Advantages for the user
- Large measuring range: 0.01 .. 10 m/s
- Measurement of very low flow velocities is possible
- Measurement of unsteady air flows
- Determination and Consideration of turbulence rate
- Real time measurement with 0.1 s time resolution for air flow velocity and direction
- No sensor adjustment for the determination of flow direction is needed
- No special knowledge for the realization of measuring tasks is needed
- Calibration for several velocity ranges
- A lot of possibilities for supervision and control functions
|0..0,5 0..1, 0..2, 0..5, 0..10 m/s|
|Flow direction||3D room|
|Measuring accuracy||1..5 %, depending on the measuring range|
|Turbulence rate||determination from 0 %|
|Turbulence rate correction||consideraton of turbulence effect|
|GrenzfreqFrequency limituenz||140 Hz|
|Update interval||10 ms|
|Data output||analog/ digital|
|Software with individual adaption to specific requirements||determination of thermal behavior|
recording of three-dimensional flow fields
|Further mesuring points||e.g. temperature, humidity, radiation, air pressure|
|Sensor positioning||laser pointer|
|Options||Transport box, tripod, laptop, printer, data logger, controlling component|
Further Projects - Technology transfer
Electrochemical decontamination of electrically conducting surfaces „EDeKo II“
Improvement of sanitary prevention by electrochemical decontamination