Current research projects

Image Low Temperature Tribology
Image Software for technical building equipment
Image High temperature heat pump
Image Panel with indirect evaporative cooling via membrane
Image Cool Up
Image Breakthrough Sensor for Adsorption Filters (BelA)
Image Range of services laboratory analyses
Image Test procedures for electrical components
Image Lifetime prediction of hermetic compressor systems
Image Non- invasive flow measurements
Image Tensile and compression testing
Image Brine (water)-water heat pump
Image Intelligent innovative power supply for superconducting coils
Image Electrochemical decontamination of electrically conducting surfaces „EDeKo II“
Image Certifiable connection types in cryogenics
Image CFE-Test of Cooker Hoods

You are here:  Home /  Testing Equipment


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects - Testing Equipment

Image

Breakthrough Sensor for Adsorption Filters (BelA)

Sensor system for detecting an imminent breakthrough in gas filtration

Image

Low temperature – test facilities

thermal cycling tests at very low temperatures

Image

All-in-one device for freeze-drying and production of biomaterial

with automated freezing and sterilisation option

Image

Corrosion inhibitor for ammonia absorption systems

An alternative to chromium(VI) compounds