Aktuelle Forschungsprojekte

Image Software for test rigs
Image Investigation of materials
Image Innovative Parahydrogen Generator Based on Magnets
Image Verification of storage suitability of cryo tubes
Image Software modules
Image Reducing the filling quantity
Image Certifiable connection types in cryogenics
Image Development of a Cryogenic Magnetic Air Separation Unit
Image Innovative cryogenic cooling system for the recondensation / liquefaction of technical gases up to 77 K
Image Filter Tests
Image Measurements on ceiling mounted cooling systems
Image Preformance measurements of heat exchangers
Image Brine (water)-water heat pump
Image Innovative small helium liquefier
Image Modular storage system for solar cooling
Image 3D - Air flow sensor

You are here:   /  Home


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects