Current research projects

Image Electrochemical decontamination of electrically conducting surfaces „EDeKo II“
Image Breakthrough Sensor for Adsorption Filters (BelA)
Image Lifetime prediction of hermetic compressor systems
Image Testzentrum PLWP at ILK Dresden
Image 3D - Air flow sensor
Image Pulse-Tube-Refrigerator with sealed compressor
Image Thermal engines
Image Electrical components in refrigeration circuits
Image Software for test rigs
Image Innovative Parahydrogen Generator Based on Magnets
Image Investigation of coolants
Image Brine (water)-water heat pump
Image Investigation of materials
Image Characterisation of Superconductors in Hydrogen Atmosphere
Image Software for technical building equipment
Image IO-Scan - Integral measuring optical scanning method

You are here:   /  Home


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects

Image

Test procedures for electrical components

Insulating properties of hermetic compressors

Image

3D - Air flow sensor

Anemometer for determination of 3d-air flow