Image Intelligent innovative power supply for superconducting coils
Image Measurement of insulated packaging
Image Hybrid- Fluid for CO2-Sublimation Cycle
Image Multifunctional electronic modules for cryogenic applications
Image Refrigerants, lubricants and mixtures
Image Filter Tests
Image Investigation of coolants
Image Innovative Parahydrogen Generator Based on Magnets
Image High Capacity Pulse Tube Cooler
Image Heat2Power
Image Cryogenic liquid piston pumps for cold liquefied gases like LIN, LOX, LHe, LH2, LNG, LAr
Image Thermostatic Expansion Valves
Image Energy efficiency consulting - cogeneration systems
Image Air-water heat pumps
Image Non- invasive flow measurements
Image Cold meter

You are here:  Home /  Measurements and Tests


Investigation of materials

Dr.-Ing. Margrit Junk

+49-351-4081-754

Investigations regarding the compatibility of materials with refrigerants, oils and heat transfer fluids

Our portfolio includes testing

  • of materials such as polymers, elastomers, nonwovens, adhesives, and metals,
  • of material composites such as wire enamels and hoses, as well as
  • of components and assemblies

together with refrigerant and oil (also under pressure) or with heat transfer fluids as well as

  • of the autostability of oil and refrigerant together with catalyst metals.

We offer tests according to common standards and company standards, but we are also happy to work with you to develop test scenarios tailored to your requirements

Our range of services:

  • Testing of standard samples and components under the influence of refrigerants, refrigerating machine oils and heat transfer fluids in accordance with

    - national and international standards, including

    § ANSI/ASHRAE 97

    § DIN EN ISO 14903

    § DIN EN ISO 23936-2

    § DIN ISO 1817

    § Norsok M-710

    - standards of automotive industry, both OEM and suppliers

    - standards of compressor manufacturers.

  • For aging tests our lab is equipped with:

    - Pressure vessels (autoclaves) with volumes from 300 ml to 2000 ml (for pressures up to 200 bar)

    - ovens/climate chambers for the temperature range from -40 °C to 300 °C.

  • The tests include:

    - swelling behavior

    - hardness (IRHD, µShore D, Vickers, Brinell)

    - tensile, flexural and compression testing

    - compression set under temperature and media loading

    - rapid gas decompression

    - environmental stress cracking tendency of polymers

    - testing of adhesive joints (tensile shear test according to DIN EN 1465)

    - determination of the glass transition temperature (DSC)

    - permeation properties of elastomers

  • Characterization of working fluids

    - Total acid and base number of oils

    - water content of oils and refrigerants

    - IR spectroscopy

    - gas chromatography (GC-MS/FID) of refrigerants and oils

    - ICP-OES for the determination of metal contents in oils and heat transfer fluids

    - electrical properties (incl. conductivity of oils and refrigerants)

The mentioned tests are only a part of our portfolio. If the test conditions or parameters you require are not listed, please do not hesitate to contact us.


Your Request

Further Projects - Measurements and Tests

Image

Electrochemical decontamination of electrically conducting surfaces „EDeKo II“

Improvement of sanitary prevention by electrochemical decontamination

Image

Electrical components in refrigeration circuits

High voltage tests under real conditions

Image

Non- invasive flow measurements

PDPA - flow fields and particle sizes


Contact

Institut für Luft- und Kältetechnik - Gemeinnützige Gesellschaft mbH
Bertolt-Brecht-Allee 20, 01309 Dresden


Secretary to the Management

+49-351-4081-520

+49-351-4081-525

Image ISO 9001
Bild Zuse Mitglied Bild SIG