Current research projects

Image Mass Spectrometer
Image Development of test methods and test rigs for stationary integrated refrigeration units
Image Breakthrough Sensor for Adsorption Filters (BelA)
Image Hybrid- Fluid for CO2-Sublimation Cycle
Image Performance tests of refrigerant compressors
Image Behavior of multiphase cryogenic fluids
Image Low temperature – test facilities
Image High Capacity Pulse Tube Cooler
Image Refrigerants, lubricants and mixtures
Image Test method for high - temperature heat pump - oils
Image Combined building and system simulation
Image Industry 4.0 membrane heat and mass exchanger (i-MWÜ4.0)
Image Low noise and non metallic liquid-helium cryostat
Image All-in-one device for freeze-drying and production of biomaterial
Image Service offer for Leak Detection and Tightness Test
Image Measurement of insulated packaging

You are here:  Home /  Testing Equipment


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects - Testing Equipment

Image

Ice Slurry Generation

Using Direct Evaporation

Image

Pulse-Tube-Refrigerator with sealed compressor

for mobil use in the hydrogen technology

Image

3D - Air flow sensor

Anemometer for determination of 3d-air flow